Laptop Guides at
This guide will help update your version of the ALSA modules under Fedora 10. This is useful for people whose sound is not currently working with their current version of ALSA.
We will be using 'nano' as our text editor of choice but you can use whatever you wish.
While this guide is mainly focused to laptop users there isn't any difference for desktop users.
You should run a full update for your installation of Fedora to ensure you have all the latest packages installed. Unlike most other Linux distribution, Fedora update their distribution to newer versions of the kernel as they are released. It is possible that by just updating your Fedora installation that sound will begin to work.
Before installing the ALSA modules, you will need to decide whether to install the latest stable or development drivers. The stable drivers are more thoroughly tested; however the development drivers typically have more hardware support.
1. Download the latest development drivers from http://www.alsa-project.org. In this guide we are going to use alsa-driver-1.0.18a as at the time of writing these are the current ones. You only need to download the alsa-driver package, the other packages (alsa-lib, alsa-utils etc.) are not necessary.
2. Load up a terminal window if you are in the graphic interface.
3. Switch to the root user by entering the command “su -” (without the quotes) and type in your root password.
4. Type in the following to install gcc and the kernel headers:
yum install gcc kernel-devel make patch
5. Move to the /usr/src/ folder with:
6. Extract the contents of the file you downloaded with:
tar -xjvf /path/to/alsa-driver-1.0.18a.tar.bz2
Remember to replace the “/path/to” in this command to the path of where your file is.
7. Move into the newly created folder with
8. Run the configuration script with:
9. Now start the building process with:
This will take a while.
10. And finally we install these drivers with:
11. Reboot your computer and the newer ALSA modules will be used.
Remember that you may need to adjust your volume settings.
The CVS drivers are right up to date with the latest developments. However these have barely been testing so should only be used if absolutely necessary.
The steps to installing these drivers are exactly the same as above except for the file you need to download. You can download these drivers from http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/. Grab the latest version. Then just follow the instruction above by substituting the development version with the CVS version.